Enquiry list Contact sales
Products

Surveillance

Installation and accessories

Networking

Access and attendance

Computer components

Storage

Power and UPS

Peripherals and displays

Printing and POS

Software

All product categories
Brands
All brands
Support
Company
Enquiry list Contact sales

PoE switches

24-port gigabit L3 managed PoE switch with 4 SFP

Model TEG5328P

Layer 3 managed PoE switch with 24 gigabit PoE+ ports and four SFP slots. Its PoE output is 370 W in total and 30 W per port.

PoE ports
24
Uplink ports
4 (SFP)
PoE budget
370 W
SFP
4 x SFP
Request a quote
Overview Specifications Media Works with Support
Request a quote

Overview

Highlights

  • 24 x 10/100/1000 Mbps PoE+ ports (802.3af/at), 30 W per port
  • 370 W total PoE output
  • 4 x 1000Base-X SFP slots and a console port
  • Layer 3 static routing, IEEE 802.1Q VLAN, LACP, STP, RSTP and MSTP
  • PoE scheduling, over-temperature protection and port priority
  • 56 Gbps switching capacity, 6 kV lightning protection, web, Telnet and SNMP management

At a glance

A 24-port gigabit PoE switch with 4 uplink ports, an SFP slot for fibre and a 370 W PoE budget, for powering and connecting IP cameras over Cat6.

PoE ports
24, Gigabit
Uplink
4 (SFP)
SFP
SFP
PoE budget
370 W
Cable
Cat6, up to 100 m per run to each camera Cat6 cable

PoE budget check

Cameras this switch can power at a typical draw per camera, using the 370 W budget and 24 PoE ports.

Power per camera Cameras Power used Limited by
4 W 24 96 W of 370 W Port count
6 W 24 144 W of 370 W Port count
8 W 24 192 W of 370 W Port count

Check each camera’s maximum power consumption in its datasheet; infrared at night and heaters raise it. Leave some headroom rather than loading the budget to the limit.

Check a budget for your own cameras

Specifications

Ports and standards

Network standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.3af/at, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1d, IEEE 802.1s
LED indicator
1 x Link/Act or PoE LED indicator1 x Link/1 x Link/Act mode converting LED indicator1 x PoE mode converting LED indicator1 x PoE Max LED indicator1 x Power LED indicator1 x SYS LED indicator
Interfaces
24 x 10/100/1000 Base-T Ethernet ports4 x 1000 Base-X SFP ports1 x Console port
Transmission media
Recommended: CAT5/5e UTP or better

Performance

Forwarding mode
Store-and-forward
Switch capacity
56 Gbps
Packet forwarding rate
41.70 Mpps
Buffer
12 Mb
MAC address table
16K
Jumbo frame
10K

PoE

PoE power supply management
Supported
PoE budget
Total PoE output: 370 WSingle port: 15.4 W (802.3af), 30 W (802.3at)

Power

Input voltage
100 to 240 V AC 50/60 Hz
Power consumption
Full load: <432 WEmpty load: <23 W
Energy efficient
Supported

Physical and environment

Fan quantity
2
Lightning protection for ports
6 kV
Lightning protection for power
6 kV
ESD air discharge
±10 kV
ESD contact discharge
±8 kV
Dimensions
440.0 x 284.0 x 44.0 mm
Desktop mounting
Supported
Wall mounting
Supported
Rack mounting
Supported (19-inch, 1U shell)
Operating temperature
0 to 45 °C
Storage temperature
-40 to 70 °C
Operating humidity
10% to 90% RH, non-condensing
Storage humidity
5% to 90% RH, non-condensing
Certification
FCC, CE, RoHS

Software

L3 features
Supports VLAN-based routingSupports static routingSupports static ARP
PoE power supply management
Supports port PoE configuration and power supply with prioritySupports PoE over-temperature protectionSupports PoE scheduled managementSupports intelligent management and PoE-powered device detection(port status, power assignment and PoE-powered device status)
Security features
ARP receiving limit, Unknown MAC address discard, DoS attack defence, 802.1x security authentication, Radius security authentication
VLAN
IEEE 802.1Q VLANVLAN Layer-3 interfacesSupports three port modes: Access, Trunk and hybrid
DHCP
DHCP server, DHCP relay, DHCP snooping, Supports Option 82 policy configuration
Port aggregation
Static aggregationLACP dynamic aggregation
Spanning tree
IEEE 802.1d STP (Spanning Tree Protocol)IEEE 802.1w RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)Supports edge portSupports BPDU statistics
Multicast
IGMP snooping V1/V2/V3Supports port fast leave
Port mirroring
Supports N: 1 port mirroring
Quality of service
SP (Strict Priority)SWRR (Simple Weighted Round Robin)WRR (Weighted Round Robin)Supports 802.1p port trust modeSupports DSCP port trust modeSupports a maximum of 8-queue service quality mapping
ACL
Supports MAC ACL and IP ACL
Loading and upgrade
Supports FTP/TFTP/HTTP upgradeSupports configuration import and export
Management and maintenance
Supports Telnet, Console, Supports SNMP V1/V2/V3, Supports web management and maintenance, Supports ping/Tracert/Connection detection, CPU Monitoring and memory monitoring

Specifications are taken from the manufacturer's published information and may change. Confirm critical values with our sales desk before ordering.

Tenda product page

Media

Photos 4

Downloads

Official information

Tenda product page for TEG5328P tendacn.com

Works with

IP cameras

View all

NVRs

View all

Cat6 cable

View all

Support

Warranty and repairs

Warranty is as per Tenda’s terms for this model. For products bought from us, call our service team with the invoice number, the model and the product’s serial number.

From Tenda

Practical notes

  1. Add up the power draw of connected cameras and keep it within the PoE budget.
  2. Keep each Cat6 run within 100 m.
  3. Mount the switch where it can ventilate, ideally in a rack.

Request a quote

Share the quantity and delivery location for TEG5328P. Our sales desk replies with price and availability, subject to stock.

You are a (optional)

Sending opens WhatsApp with your enquiry filled in, ready to send to our sales desk.

Similar models

All PoE switches

Pairs with

Tenda TEG5328P 1 / 4