PoE switches

24-port PoE switch

Model CP-ANW-HPU24G2F2-N30

24 ports unmanaged PoE switch with 2 gigabit uplink & 2 SFP ports. Switch that powers and connects IP cameras over Ethernet cable.

PoE ports
24
Uplink ports
2 (incl. SFP)
PoE budget
300 W

Overview

Highlights

  • 24 × RJ-45 10/100 Mbps (PoE) Ports, 2 × RJ-45 Gigabit (Uplink) Ports, 2 × SFP Uplink Ports
  • Extended transmission mode up to 250m at 10 Mbps
  • Networking standard: IEEE 802.3i 10BASE-T/IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3x Flow Control, IEEE 802.3af/at/bt Power over Ethernet
  • PoE Power Budget: 300 W (Max 30 W/60 W per port)
  • Switching Capacity: 12.8 Gbps
  • Easy and safe installation: plug-and-play, desktop design

At a glance

A 24-port PoE switch with 2 uplink ports, an SFP slot for fibre and a 300 W PoE budget, for powering and connecting IP cameras over Cat6.

PoE ports
24, Fast Ethernet
Uplink
2 (incl. SFP)
SFP
SFP
PoE budget
300 W
Cable
Cat6, up to 100 m per run to each camera Cat6 cable

PoE budget check

Cameras this switch can power at a typical draw per camera, using the 300 W budget and 24 PoE ports.

Power per camera Cameras Power used Limited by
4 W 24 96 W of 300 W Port count
6 W 24 144 W of 300 W Port count
8 W 24 192 W of 300 W Port count

Check each camera’s maximum power consumption in its datasheet; infrared at night and heaters raise it. Leave some headroom rather than loading the budget to the limit.

Check a budget for your own cameras

Specifications

Ports

Network port
28 Ports
PoE ports
1-22 Ports: 10/100Mbps PoE ports (RJ45); 23-24 Ports: 10/100Mbps PoE ports, Support bt 60W High Power
Uplink ports
2, 10/100/1000Mbps, RJ45 uplink Ports; 2, 10/100/1000Mbps SFP uplink Ports

Switching

Network standard
IEEE 802.3i 10BASE-T/IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3x Flow Control, IEEE 802.3af/at/bt Power over Ethernet
Bandwidth
12.8Gbps
Network latency
≤16μs (use the 64byte package size)
MAC address table
8K
VLAN
Support
AI watchdog
Support
Transmission rate
2000Mbps Full Duplex; 10 or 100 or 1000 Mbps Half Duplex The Frame Filter & Transmission Rate: 14800pps the most for 10M port, 148800pps the most for 100M port;1488000pps the most for 1000M port
Transmission distance
100Mbps /10Mbps, Auto-Adaption 250m

Protection

Protection
ESD Protection:8KV Lightning Protection:6KV

Power and environment

Power source
Built-in Power Supply Input: AC 90~240V Total≤300W Output: PoE 1~22 Port:1/2(+52V), 3/6(GND)≤30W, PoE 23~24 Port:1245(+52V), 3678(GND) Compatible1/2(+52V), 3/6(GND)≤60W
Operating temperature
-30°C ~60°C
Operating humidity
10%~90% Non-condensing
Storage temperature
-40°C~70°C
Storage humidity
5%~90% Non-condensing
Dimension
440mm x 180mm x 45mm
Weight
2650g
Certificates
ISO 9001: 2015, ISO 20000-1: 2018, ISO 14001: 2015, ISO 45001: 2018, ISO 50001:2018, CE, FCC and RoHS, TEC/ MTCTE

Specifications are taken from the manufacturer's published information and may change. Confirm critical values with our sales desk before ordering.

CP PLUS product page

Works with

IP cameras

Cat6 cable

Support

Warranty and repairs

Warranty is as per CP PLUS’s terms for this model. For products bought from us, call our service team with the invoice number, the model and the product’s serial number.

From CP PLUS

Practical notes

  1. Add up the power draw of connected cameras and keep it within the PoE budget.
  2. Keep each Cat6 run within 100 m.
  3. Mount the switch where it can ventilate, ideally in a rack.

Request a quote

Share the quantity and delivery location for CP-ANW-HPU24G2F2-N30. Our sales desk replies with price and availability, subject to stock.

You are a (optional)

Sending opens WhatsApp with your enquiry filled in, ready to send to our sales desk.

Similar models

Pairs with