PoE switches

16-port PoE switch with 2 gigabit uplinks and 1 SFP

Model TEF1118P-16

Unmanaged PoE switch with 16 Fast Ethernet PoE+ ports, two gigabit uplink ports and a combo SFP slot. Its PoE output is 130 W in total and 30 W per port.

PoE ports
16
Uplink ports
2
PoE budget
130 W (150 W whole device)
SFP
1 x SFP (combo)

Overview

Highlights

  • 16 x 10/100 Mbps PoE+ ports (802.3af/at), 30 W per port
  • 130 W total PoE output
  • 2 x gigabit RJ45 uplinks and 1 x combo SFP slot
  • Four modes set by a DIP switch: standard, priority, extend and VLAN
  • 6 kV lightning protection, desktop or rack mounting
  • 7.2 Gbps switching capacity, 4K MAC address table

At a glance

A 16-port PoE switch with 2 uplink ports, an SFP slot for fibre and a 130 W PoE budget, for powering and connecting IP cameras over Cat6.

PoE ports
16, Fast Ethernet
Uplink
2 ports to the NVR or network
SFP
SFP
PoE budget
130 W (150 W whole device)
Cable
Cat6, up to 100 m per run to each camera Cat6 cable

PoE budget check

Cameras this switch can power at a typical draw per camera, using the 130 W budget (the lower of the listed figures) and 16 PoE ports.

Power per camera Cameras Power used Limited by
4 W 16 64 W of 130 W Port count
6 W 16 96 W of 130 W Port count
8 W 16 128 W of 130 W Port count

Check each camera’s maximum power consumption in its datasheet; infrared at night and heaters raise it. Leave some headroom rather than loading the budget to the limit.

Check a budget for your own cameras

Specifications

Ports and standards

Network standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.3af/at
LED indicator
16 x Link/Act LEDs, 1 x G1 LED, 1 x G2/SFP2 LED, 1 x PoE-MAX LED, 1 x Power LED
Interfaces
16 x 10/100 Base-TX Ethernet ports (Data/Power)2 x 10/100/1000 Base-T Ethernet ports (Data)1 x 1000 Base-X SFP port (Combo)
Transmission media
Recommended: CAT5/5e UTP or better

Performance

Forwarding mode
Store-and-forward
Switch capacity
7.2 Gbps
Packet forwarding rate
5.36 Mpps
Buffer
1.25 Mb
MAC address table
4K

PoE

PoE budget
Total PoE output: 130 WSingle port: 15.4 W (802.3af), 30 W (802.3at)Whole device: 150 W

Power

Input voltage
100 to 240 V AC 50/60 Hz

Physical and environment

Dimensions
294.0 x 178.8 x 44.0 mm
Lightning protection for ports
6 kV
Lightning protection for power
6 kV
ESD air discharge
±10 kV
ESD contact discharge
±8 kV
Desktop mounting
Supported
Wall mounting
Supported
Rack mounting
Supported
Operating temperature
0 to 45 °C
Storage temperature
-40 to 70 °C
Operating humidity
10% to 90%, non-condensing
Storage humidity
5% to 90%, non-condensing
Certification
FCC, CE, RoHS

Specifications are taken from the manufacturer's published information and may change. Confirm critical values with our sales desk before ordering.

Tenda product page

Works with

IP cameras

Cat6 cable

Support

Warranty and repairs

Warranty is as per Tenda’s terms for this model. For products bought from us, call our service team with the invoice number, the model and the product’s serial number.

From Tenda

Practical notes

  1. Add up the power draw of connected cameras and keep it within the PoE budget.
  2. Keep each Cat6 run within 100 m.
  3. Mount the switch where it can ventilate, ideally in a rack.

Request a quote

Share the quantity and delivery location for TEF1118P-16. Our sales desk replies with price and availability, subject to stock.

You are a (optional)

Sending opens WhatsApp with your enquiry filled in, ready to send to our sales desk.

Similar models

Pairs with