Enquiry list Contact sales
Products

Surveillance

Installation and accessories

Networking

Access and attendance

Computer components

Storage

Power and UPS

Peripherals and displays

Printing and POS

Software

All product categories
Brands
All brands
Support
Company
Enquiry list Contact sales

PoE switches

8-port PoE switch with 2 gigabit uplinks

Model S110GPC

Desktop PoE switch with eight Fast Ethernet PoE ports and two gigabit uplink ports. It supplies 30 W per port and 80 W for the whole device.

PoE ports
8
Uplink ports
2
PoE budget
80 W (whole device)
Request a quote
Overview Specifications Media Works with Support
Request a quote

Overview

Highlights

  • 8 x 10/100 Mbps PoE ports (802.3af/at), 30 W per port
  • 2 x 10/100/1000 Mbps uplink ports, for an NVR and a router at the same time
  • 80 W whole-device power
  • Standard and extend modes set by a DIP switch, 250 m reach on ports 1 to 8 in extend mode
  • 4 kV port lightning protection
  • 5.6 Gbps switching capacity, 4.17 Mpps forwarding rate

At a glance

An 8-port PoE switch with 2 uplink ports and a 80 W PoE budget, for powering and connecting IP cameras over Cat6.

PoE ports
8, Fast Ethernet
Uplink
2 ports to the NVR or network
PoE budget
80 W (whole device)
Cable
Cat6, up to 100 m per run to each camera Cat6 cable

PoE budget check

Cameras this switch can power at a typical draw per camera, using the 80 W budget and 8 PoE ports.

Power per camera Cameras Power used Limited by
4 W 8 32 W of 80 W Port count
6 W 8 48 W of 80 W Port count
8 W 8 64 W of 80 W Port count

Check each camera’s maximum power consumption in its datasheet; infrared at night and heaters raise it. Leave some headroom rather than loading the budget to the limit.

Check a budget for your own cameras

Specifications

Ports and standards

Network standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Interfaces
8 x 10/100 Base-T Ethernet ports (Data/Power)2 x 10/100/1000 Base-T Ethernet ports (Data)
LED indicator
1 x Link/Act LED per port1 x Power LED per device
PoE ports
8
Uplink ports
2

Performance

Forwarding mode
Store-and-forward
Switch capacity
5.6 Gbps
Packet forwarding rate
4.17 Mpps
MTBF
100,000 hours or more

PoE

PoE standard
Ports 1 to 8 are compatible with IEEE 802.3af/at
PoE budget
Single port: 30 WWhole device: 80 W
Working modes
Set by a hardware DIP switchStandard: all ports communicate with each other, like an ordinary PoE switchExtend: ports 1 to 8 reach up to 250 m and all ports communicate with each other
QoS priority
Ports 7 and 8

Power

Input voltage
AC 220 V, 50 Hz, 1.7 A
Whole device power
80 W

Physical and environment

Dimensions
175 x 127 x 43 mm (L x W x H)
Port lightning protection
4 kV or more
Operating temperature
0 to 45 °C
Storage temperature
-40 to 70 °C
Operating humidity
10% to 90% RH, non-condensing
Storage humidity
5% to 90% RH, non-condensing

Specifications are taken from the manufacturer's published information and may change. Confirm critical values with our sales desk before ordering.

Tenda product page

Media

Photos 4

Downloads

Official information

Tenda product page for S110GPC tenda.com.cn

Works with

IP cameras

View all

NVRs

View all

Cat6 cable

View all

Support

Warranty and repairs

Warranty is as per Tenda’s terms for this model. For products bought from us, call our service team with the invoice number, the model and the product’s serial number.

From Tenda

Practical notes

  1. Add up the power draw of connected cameras and keep it within the PoE budget.
  2. Keep each Cat6 run within 100 m.
  3. Mount the switch where it can ventilate, ideally in a rack.

Request a quote

Share the quantity and delivery location for S110GPC. Our sales desk replies with price and availability, subject to stock.

You are a (optional)

Sending opens WhatsApp with your enquiry filled in, ready to send to our sales desk.

Similar models

All PoE switches

Pairs with

Tenda S110GPC 1 / 4