Enquiry list Contact sales
Products

Surveillance

Installation and accessories

Networking

Access and attendance

Computer components

Storage

Power and UPS

Peripherals and displays

Printing and POS

Software

All product categories
Brands
All brands
Support
Company
Enquiry list Contact sales

PoE switches

8-port gigabit PoE switch with 2 uplinks

Model SG110PC

Desktop gigabit PoE switch with eight PoE ports and two gigabit uplink ports. Its PoE output is below 95 W in total and 30 W per port, in a 100 W whole-device rating.

PoE ports
8
Uplink ports
2
PoE budget
95 W (100 W whole device)
Request a quote
Overview Specifications Media Works with Support
Request a quote

Overview

Highlights

  • 8 x 10/100/1000 Mbps PoE ports (802.3af/at), 30 W per port
  • 2 x 10/100/1000 Mbps uplink ports, for an NVR and a router at the same time
  • Below 95 W total PoE output, 100 W whole device
  • Standard and VLAN modes, QoS priority on ports 1 and 2
  • 4 kV lightning protection, desktop or wall mounting
  • 20 Gbps switching capacity, 14.9 Mpps forwarding rate

At a glance

An 8-port gigabit PoE switch with 2 uplink ports and a 95 W PoE budget, for powering and connecting IP cameras over Cat6.

PoE ports
8, Gigabit
Uplink
2 ports to the NVR or network
PoE budget
95 W (100 W whole device)
Cable
Cat6, up to 100 m per run to each camera Cat6 cable

PoE budget check

Cameras this switch can power at a typical draw per camera, using the 95 W budget (the lower of the listed figures) and 8 PoE ports.

Power per camera Cameras Power used Limited by
4 W 8 32 W of 95 W Port count
6 W 8 48 W of 95 W Port count
8 W 8 64 W of 95 W Port count

Check each camera’s maximum power consumption in its datasheet; infrared at night and heaters raise it. Leave some headroom rather than loading the budget to the limit.

Check a budget for your own cameras

Specifications

Ports and standards

Network standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab
LED indicator
10 x Link/Act LED indicators1 x Power LED indicator
Interfaces
8 x 10/100/1000 Base-TX Ethernet Ports (Data/Power)2 x 10/100/1000 Base-TX Ethernet Port (Data)
Transmission media
Recommended: CAT5/5e UTP or better

Performance

Forwarding mode
Store-and-forward
Switch capacity
20 Gbps
Packet forwarding rate
14.9 Mpps
MAC address table
4K

PoE

PoE budget
Total PoE output: below 95 WSingle port: 30 W (802.3af/at)Whole device: 100 W

Power

Input voltage
190 to 240 V AC 50/60 Hz

Physical and environment

Dimensions
175 x 127 x 43 mm (L x W x H)
Level of protection
4 kV
Desktop mounting
Supported
Wall mounting
Supported
Rack mounting
Not supported
Operating temperature
0 to 40 °C
Storage temperature
-40 to 70 °C
Operating humidity
10% to 90%, non-condensing
Storage humidity
5% to 90%, non-condensing

Specifications are taken from the manufacturer's published information and may change. Confirm critical values with our sales desk before ordering.

Tenda product page

Media

Photos 4

Downloads

Official information

Tenda product page for SG110PC tendacn.com

Works with

IP cameras

View all

NVRs

View all

Cat6 cable

View all

Support

Warranty and repairs

Warranty is as per Tenda’s terms for this model. For products bought from us, call our service team with the invoice number, the model and the product’s serial number.

From Tenda

Practical notes

  1. Add up the power draw of connected cameras and keep it within the PoE budget.
  2. Keep each Cat6 run within 100 m.
  3. Mount the switch where it can ventilate, ideally in a rack.

Request a quote

Share the quantity and delivery location for SG110PC. Our sales desk replies with price and availability, subject to stock.

You are a (optional)

Sending opens WhatsApp with your enquiry filled in, ready to send to our sales desk.

Similar models

All PoE switches

Pairs with

Tenda SG110PC 1 / 4