Back-UPS BX 1100 VA UPS

Model BX1100

Line-interactive Back-UPS rated 1100 VA / 660 W with automatic voltage regulation and five India 6A outlets, four of them with battery backup.

Capacity: 1100 VA / 660 W
Topology: Line interactive with AVR
Outlets: 5 x India 3-pin 6A
Runtime at 100 W: 33 minutes

Download product datasheet
Warranty as per APC terms. Claims are handled through our service team.

Overview Specifications Media Works with Support

Overview

Highlights

1100 VA / 660 W line-interactive UPS with automatic voltage regulation
5 India 3-pin 6A outlets: 4 with battery backup and surge protection, 1 with surge protection only
Transfers to battery below 145 V or above 290 V input (typical)
Two internal sealed lead-acid batteries, 12 V 7.2 Ah each
Battery saver mode and resettable circuit breaker
Typical runtime 33 minutes at 100 W

It uses two internal 12 V, 7.2 Ah lead-acid batteries and has a typical runtime of 33 minutes at 100 W.

At a glance

Capacity: 1.1 kVA
Used with: Batteries and spike busters and surge protectors See products

Specifications

Model

Part number: BX1100C-IN
Range: Back-UPS

Power

Rated power: 1100 VA / 660 W
UPS topology: Line interactive, with automatic voltage regulation (AVR)
Output voltage: 230 V AC, single phase
Output frequency: 50 Hz, synchronised to mains
Waveform on battery: Stepped approximation to a sine wave
Transfer time: 10 ms typical, 12 ms maximum
Efficiency: 72% at full load, 84% at half load
Typical runtime at 100 W: 33 minutes

Input

Input voltage: 230 V AC, single phase
Input voltage range: 145 to 290 V (under-voltage and over-voltage transfer points)
Input frequency: 45 to 65 Hz, auto-sensing
Input plug: India 3-pin 6A
Power cord length: 1.5 m

Outlets and protection

Output connections: 5 x IS 1293 India 3-pin 6A: 4 with battery backup and surge protection, 1 with surge protection only
Surge energy rating: 255 J
Overload protection: Resettable circuit breaker
Control panel: LED status display: on line, on battery, replace battery, overload
Alarms: Alarm when on battery, distinctive low battery alarm, overload continuous tone alarm

Battery

Battery type: Lead-acid, internal, maintenance-free
Battery rating: 2 x 12 V, 7.2 Ah
Replacement battery: RBC2 (2 required)
Typical recharge time: 6 h

Physical

Dimensions (height x width x depth): 282 x 132 x 259 mm
Weight: 8.98 kg
Colour: Black
Mounting: Tower, not rack-mountable

Environment

Operating temperature: 0 to 40 °C
Storage temperature: -15 to 45 °C
Relative humidity: 0 to 95%, non-condensing
Operating altitude: 0 to 3000 m
Acoustic level: 45 dBA
Certification: BIS

Warranty

Warranty: 24 months

Specifications are taken from the manufacturer's published information and may change. Confirm critical values with our sales desk before ordering.

APC product page

Media

Photos 2

Downloads

Official information

APC product page for BX1100 se.com

Works with

Batteries

View all

CyberPower

5 Ah UPS battery
- 5 Ah
- Replacement battery for UPS
View details
Exide

12 V 7.2 Ah SMF battery
- 12 V
- 7.2 Ah (as listed)
- EP7.5-12 (7.5 Ah)
View details
Exide

12 V 18 Ah SMF battery
- 12 V
- 18 Ah
- Sealed VRLA (AGM)
View details
Exide

12 V 26 Ah SMF battery
- 12 V
- 26 Ah (20 hour rate)
- 178 x 124 x 179 mm
View details
Exide

12 V 42 Ah SMF battery
- 12 V
- 42 Ah (20 hour rate)
- 199 x 165 x 181 mm
View details
Exide

12 V 65 Ah SMF battery
- 12 V
- 65 Ah (20 hour rate)
- 350 x 166 x 181 mm
View details

Spike busters and surge protectors