CCTV power supplies

12V 20A metal SMPS

Model CP-DPS-MD200P-12D

Metal case power supply (premium series). Power supply for CCTV cameras and recorders.

Output
12 V DC, 20 A
Enclosure
Metal
Efficiency
84%

Overview

Highlights

  • Wide range of Input voltage 190~250V AC
  • Add more cameras with higher power budget 12V, 20A
  • Built-in EMI filter to nullify interference
  • Voltage regulator switch for voltage adjustment
  • Protections: Overload / Over Voltage / Short Circuit
  • Metal Housing for uniform/quick heat dissipation

At a glance

Used with
HD cameras, DVRs and cables See products

Specifications

Output

Output voltage
12V DC
Current range
0~20A
Rated power
240W
Ripple & noise (max.)
100mVp-p
Voltage adj. range
11.4~13.2V
Line regulation
±1.0%
Voltage tolerance
±2.0%
Setup rise time
600ms, 30ms at full load
Hold up time (typ.)
13ms at full load
Load regulation
±5.0%

Input

Input voltage
190~250V AC
Frequency range
47~63HZ
AC current (typ.)
5A/115VAC 3A/230VAC
Inrush current (typ.)
20A/115VAC 40A/230VAC
Leakage current
<2mA / 240VAC

Protection and safety

Over load
110~200% rated output power, Protection type: Shut down O/P, re-power
Isolation resistance
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH
Withstand voltage
I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG:0.5KVAC

Environment and physical

Temperature coefficient
±0.03%/°C (0~50°C)
Efficiency (typ.)
84%
Working humidity
20~90% RH Non-condensing
Vibration
10 ~ 500Hz, 3G 10min./1 cycle,60min.each along X, Y, Z axes
Dimension
196(L) x 114(W) x 55mm(H)
Store temperature
-20~+85°C, 10~95%RH
Working temperature
-20~+40°C

Specifications are taken from the manufacturer's published information and may change. Confirm critical values with our sales desk before ordering.

CP PLUS product page

Works with

HD cameras

Cables

Support

Warranty and repairs

Warranty is as per CP PLUS’s terms for this model. For products bought from us, call our service team with the invoice number, the model and the product’s serial number.

From CP PLUS

Practical notes

  1. Leave headroom between the total camera load and the rated output.
  2. On long cable runs, check the voltage at the camera end; a low voltage often shows up as IR faults at night.

Request a quote

Share the quantity and delivery location for CP-DPS-MD200P-12D. Our sales desk replies with price and availability, subject to stock.

You are a (optional)

Sending opens WhatsApp with your enquiry filled in, ready to send to our sales desk.

Pairs with